八戒网站免费观看视频

Wuxi Dingfeng pressure vessel Co., Ltd. specializes in manufacturing electric heating reactor and stainless steel reactor
China chemical equipment manufacturer
With the third class pressure vessel manufacturing license
Special equipment manufacturing license No.: ts2210836-2020
  • Sales Hotline
  • seventeen billion three hundred and fifty-one million six hundred and eighty-eight thousand eight hundred and fifty-eight
News and information

Current location: homepage > News and information >

Preparation of stainless steel reactor before and after operation

Before the operation of stainless steel reactor, check whether the indicating instrument, kettle, agitator, rotating part, auxiliary equipment, pipeline and valve meet the requirements. Check whether the gas, water and electricity meet the requirements. After the stainless steel reactor is shut down, stop mixing, cut off the power supply and close the valve. Cut off the power supply of the mixer, hang warning signs, and set up a person to monitor. The stainless steel reactor shall be inspected regularly according to the requirements of pressure vessel. If the inspection is unqualified, it is not allowed to start operation.
Scope of application of stainless steel reactor: it is suitable for high temperature and high pressure chemical reaction test in petroleum, chemical, metallurgy, scientific research, colleges and universities. It can meet the requirements of high mixing for viscous and granular materials. When the power supply is connected, the temperature, speed, pressure and other sensors installed on the stainless steel reactor will transmit the corresponding signals to the stainless steel reactor controller. The controller will display the corresponding signals and compare the temperature signal with the temperature setting signal, and then adjust the heating power in PID mode or phase modulation mode, Make the actual temperature achieve the same purpose as the set temperature. After the speed signal is compared with the speed setting signal, the PID regulation of the motor speed is carried out to make the actual speed achieve the same purpose as the set speed. After comparing the pressure signal with the pressure setting signal, when the pressure exceeds the set value, the alarm will be given to remind the operator to deal with it in time. At the same time, the working time of stainless steel reactor was recorded to achieve the purpose of comprehensive control of stainless steel reactor.
The agitator of reactor has developed from single agitator to forced circulation with double agitator or external pump. In foreign countries, in addition to the agitator, the reactor body rotates along the horizontal line, thus increasing the reaction rate. It can not only stabilize production, increase product quality, increase income, reduce physical labor, but also clean up environmental pollution. Select process operation conditions, strengthen heat preservation measures, increase heat transfer efficiency, reduce heat loss to limit, and comprehensively utilize waste heat or energy generated after reaction. The application of heat pipe will be the development direction in the future. The stainless steel reactor should be inspected and operated according to the regulations before and after operation, so that the reactor can be used normally.
Please indicate the source of Reprint: http://yqgww.cn/

八戒网站免费观看视频_打飞专用高潮熟妇图片大全_粗大撑开紧窄的嫩缝

http://31.yqgww.cn http://74.yqgww.cn http://10.yqgww.cn http://37.yqgww.cn http://77.yqgww.cn http://88.yqgww.cn http://28.yqgww.cn http://55.yqgww.cn http://14.yqgww.cn http://44.yqgww.cn http://59.yqgww.cn