八戒网站免费观看视频

Wuxi Dingfeng pressure vessel Co., Ltd. specializes in manufacturing electric heating reactor and stainless steel reactor
China chemical equipment manufacturer
With the third class pressure vessel manufacturing license
Special equipment manufacturing license No.: ts2210836-2020
  • Sales Hotline
  • seventeen billion three hundred and fifty-one million six hundred and eighty-eight thousand eight hundred and fifty-eight
News and information

Current location: homepage > News and information >

Frequency control and sealing of stainless steel reactor

The overflow protection device of stainless steel reactor includes a cylinder, a liquid discharge port arranged at the lower side of the cylinder and a butt pipe set at the middle position of the upper end face of the cylinder body. The air outlet opening on the upper end face of the stainless steel reactor and the cylindrical floating body directly below the butt pipe are mainly used to block the elastic gasket at the lower end of the butt joint pipe.
One end of the butt joint pipe of the stainless steel reactor is connected with the overflow port of the reactor, and the other end extends into the cylinder body; The elastic washer is arranged on the upper end face of the cylindrical floating body. The overflow protection device can store the overflow temporarily and prevent the overflow, feed back the feeding device or send out alarm signal.
The high-speed disperser of stainless steel reaction kettle mainly adopts its frequency conversion speed regulation. The equipment can select its different speed according to its different technology and viscosity. The stainless steel reaction kettle of stainless steel adopts sealing, so that the materials can be mixed and stirred under vacuum, and the bubbles can be cleaned.
The inner wall of stainless steel reactor is mainly finished by large vertical lathe. In this way, the materials in the inner wall and bottom of the stainless steel reactor will be scraped off by the movable scraper when rotating. Two sets of high-speed dispersing shafts in the equipment make the materials subject to strong shear and dispersion mixing.
Stainless steel reactor can be electrically heated, steam heated and oil-water heated. The inner tube of the jacket can be cooled. The frame type stirring device in the middle has a scraping shaft, which can scrape the wall while stirring.
Please indicate the source of Reprint: http://yqgww.cn/

八戒网站免费观看视频_打飞专用高潮熟妇图片大全_粗大撑开紧窄的嫩缝

http://67.yqgww.cn http://99.yqgww.cn http://68.yqgww.cn http://56.yqgww.cn http://54.yqgww.cn http://65.yqgww.cn http://09.yqgww.cn http://14.yqgww.cn http://44.yqgww.cn http://54.yqgww.cn http://91.yqgww.cn