八戒网站免费观看视频

Wuxi Dingfeng pressure vessel Co., Ltd. specializes in manufacturing electric heating reactor and stainless steel reactor
China chemical equipment manufacturer
With the third class pressure vessel manufacturing license
Special equipment manufacturing license No.: ts2210836-2020
  • Sales Hotline
  • seventeen billion three hundred and fifty-one million six hundred and eighty-eight thousand eight hundred and fifty-eight
News and information

Current location: homepage > News and information >

Installation details and requirements of stainless steel reactor

The stainless steel reaction kettle should be placed indoors during the installation process. In the process of equipping multiple equipment, it needs to be placed separately. Each operating room in the stainless steel reactor can directly lead to the exit of the outdoor or passageway, so that the ventilation of the equipment site can be good.
When loading the stainless steel reactor cover, don't let the kettle body and the sealing surface between the kettle cover collide with each other. Put the kettle cover carefully on the kettle body according to the fixed position, and tighten the main nut step by step according to the diagonally and symmetrically several times.
In the process of screwing the cover of stainless steel reactor, the force should be uniform, and the kettle cover should not tilt to one side, so as to achieve good sealing. Only the positive and negative nuts can be rotated at the connection of the positive and negative nuts of the equipment, and the two arc covers should not rotate relative to each other. During the assembly process of the nut pattern link parts, lubricating oil should be applied.
The needle valve line seal of stainless steel reactor needs to rotate the valve needle gently and press the cover tightly when using, so as to achieve good sealing. Rotate the rotary body on the kettle by hand to check whether the operation is flexible.
The stainless steel reactor should be placed horizontally on the operation platform. The working environment temperature of the equipment is 10-40 ℃, the relative humidity is less than 85%. The medium around the equipment should not contain conductive dust and corrosive gas.
After the operation, the stainless steel reactor can be naturally cooled by its water cooling or cooling over the support. After isothermal drop, the pressurized gas in the reactor will be released, which will reduce the pressure to normal pressure, and then the main nut will be symmetrically and evenly loosened.
Please indicate the source of Reprint: http://yqgww.cn/

八戒网站免费观看视频_打飞专用高潮熟妇图片大全_粗大撑开紧窄的嫩缝

http://45.yqgww.cn http://23.yqgww.cn http://54.yqgww.cn http://96.yqgww.cn http://70.yqgww.cn http://96.yqgww.cn http://15.yqgww.cn http://97.yqgww.cn http://39.yqgww.cn http://83.yqgww.cn http://93.yqgww.cn